9CL-90330
Go-through twist socket set (10 pcs)
- Twist socket for removing rusty, stripped or worn nuts.
- Go-through design is useful for removing nuts on studs.
- Not suitable for installing new nuts.
- Use with an open or box end wrench.
- Application:
- 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 19mm
- Stock Ref. No. 9CL-91033
- Dimensions
- Instructions
- Video
| Packing | BMC | |
|---|---|---|
| Packaging | 20 | sets/carton |
| N.W | 0.48 | kg/set |
| 9.6 | kg/carton | |
| G.W. | 10.6 | kg/carton |
| Size | 20 x 11 x 3 | cm/set |
| Size | 44 x 21 x 18 | cm/carton |
- Choose an appropriate socket then put it on damaged nut.
- Loosen the nut in anticlockwise by wrench.
- Remove the twist socket with the straight rod.
Related Products
-
Wiper arm puller set (5 pcs)
- Includes 4 cup extractors and 1 adjustable puller.
- 4 cups provide wide application.
- Puller with its removable and adjustable legs works easily in small spaces.
-
Stud remover and installer set (8 pcs)
- Special design for removing and installing studs without damaging threads.
- Stock Ref. No. 9CL-91039
-
Hex-twist socket set (4 pcs)
- For loosening worn or rusty wheel nuts and some wheel locks.
- Twist profile provides more secure grips.
- Double sided design offers more applications.
- Includes a 1/2″DR extension bar
- Application:
- 17mm, 19mm, 21mm
- Stock Ref. No. 9CL-9103522
-
6/12 point twist socket set (4 pcs)
- For loosening worn or rusty wheel nuts and some wheel locks.
- Twist profile provides more secure grips.
- Double sided design offers more applications.
- Includes a 1/2″DR extension bar
- Application:
- 17mm, 19mm, 21mm
- Stock Ref. No. 9CL-9103523
-
Torx® extractors (9 pcs)
- Special tapered Torx® and twist profile easily removes damaged or stripped bolts.
- Suitable for internal hex, internal round and internal Torx® and Torx® Plus.
- Material S2 is a type of steel with enhanced strength.
- Not to be used with an air/impact wrench.
- Smaller sizes broaden applications: automobiles, motorcycles, bicycles and house appliances.
- Includes a wrench.
- Application:
- T6, T7, T8 (2mm), T9, T10 (2.5mm), T15 (3mm), T23(3.5mm), T25 (4mm)
- Height of each extractor: 38mm
- Product not available in USA
- Stock Ref. No. 9CL-9103733
-
Screw extractor set (15 pcs)
- For loosening a broken stud or worn screw/nut.
- Tapered twist profile strengthens extraction.
- Not to be used with an air/impact wrench.
- Application:
- Hex 12mm: 3mm, 1/8″, 4mm, 3/16″, 5mm, 5.5mm, 6mm, 1/4″, 8mm, 3/8″, 10mm
- Hex 16mm: 11mm, 12mm, 1/2″, 14mm
- Stock Ref. No. 9CL-9103722
-
Bolt extractor 1/2″DR (5 pcs)
- For loosening a broken stud or worn screw/nut.
- Tapered twist profile strengthens extraction.
- Not to be used with an air/impact wrench.
- Application: 8mm, 10mm, 12mm, 14mm, 16mm
- Stock Ref. No. 9CL-9103621
-
Bolt extractor 3/8″DR (6 pcs)
- For loosening a broken stud or worn screw/nut.
- Tapered twist profile strengthens extraction.
- Not to be used with an air/impact wrench.
- Application: 2mm, 3mm, 4mm, 6mm, 8mm, 10mm
- Stock Ref. No. 9CL-91036
-
Go-through twist socket set 3/8″DR + 1/2″DR (13 pcs)
- Twist socket for removing rusty, stripped or worn nuts.
- Go-through design is useful for removing nuts on studs.
- Not suitable for installing new nuts.
- Use with an open or box end wrench.
- Application:
- 3/8″ DR: 8mm, 10mm, 11mm, 12mm, 13mm, 14mm
- 1/2″ DR: 16mm, 17mm, 18mm, 19mm, 21mm
- Stock Ref. No. 9CL-9103321
-
EXT26 Motor Reborn Cleaner
- MPI /GDI /Diesel /CRDI injectors clean
- Combustion chamber & Intake valves clean
- Exhaust valves clean
- EGR & VGT Turbo clean
- DPF / CRT Filter clean
- EXT26 complete fuel system tune-up helps eliminate noisy
injectors & fuel pumps, rough idle, hard starting and hesitation. - Motor reborn cleaner (250ml)
- Holland Engineering / Made in EU / Bologna Italy
* Not available for Canada and USA
