9CL-20075
Tensioning accesory jaw set for Mercedes-Benz
- An accessory to be used with 9CL-20071 and 9CL-20073.
- Specially designed for Mercedes-Benz W204, X204 and W212 shock absorbers with fewer spring coils.
- Set includes an adapter housing (round jaw and a pair of jaws) and 3 adapters, fitting Mercedes-Benz special shock absorber covers, two 30mm long bolts with washers and two 80mm long bolts with washers.
- Stock Ref. No. 9CL-11007-15
- Dimensions
- Instructions
| Packing | BMC + EVA | |
|---|---|---|
| Packaging | 2 | sets/carton |
| N.W | 8.5 | kg/set |
| 17 | kg/carton | |
| G.W. | 18 | kg/carton |
| Size | 43.2 x 38.9 x 10.5 | cm/set |
| Size | 48.5 x 44 x 23 | cm/carton |
- Connect the round jaw to the main body.
- Choose a suitable insert adapter.
- Screw the 80L bolts through the paired jaws as the blue lines indicate. And then screw 30L bolt through the upper paired jaws, round jaw, and the insert as the end line indicate.
관련 상품
-
MacPherson strut compressor with adjustable jaws
- Tool for compressing MacPherson shock absorber coil springs.
- Jaw width is adjustable from 100 mm to 250 mm.
- Max capacity 56,800N / 5,800 kgf.
- Set designed to be used with 21 mm spanner.
- Not designed for use with an air, impact or power wrench.
- Meets standards of CE certification.
- Stock Ref. No. 9CL-11006
-
MacPherson strut compressor with replaceable jaws
- For compressing MacPherson shock absorber springs.
- Includes 3 pairs of replaceable jaws with different sizes for different applications.
- Suitable for Audi, Acura, Mercedes-Benz, BMW, Ford, Honda, Mitsubishi, Nissan, Porsche, Subaru, Toyota, Volkswagen, Volvo…
- Recommended ON-CAR application for Mercedes 4WD front suspensions.
- Max capacity 10,200 N / 1,050 kgf.
- To be used with a 24 mm spanner or an air wrench to operate this tool.
- Extension bracket provides uses on conical springs.
- Meets standards of CE certification.
- Stock Ref. No. 9CL-1100721
-
Special ring for BMW
- An accessory to be used with 9CL-20071 and 9CL-20073.
- Specially designed for BMW coil springs with fewer coils
- OD: Ø176 mm ID: Ø140 mm
- Inner ring cover (yellow) reaches EU RoHS standards, containing no substances of very high concerns (SVHC).
- Stock Ref. No. 9CL-11007-14
-
Special vise for shock absorbers with rubber holders
- Vise specially designed for holding MacPherson struts, or other cylindrical objects such as pistons, tubes and pipes etc.
- Can be fixed on a workbench or wall.
- Application range: Ø26 – 70 mm.
- With rubber holders for better gripping.
- Stock Ref. No. 9CL-1100822
-
Telescopic spring compressor
- Set for compressing shock absorber coil springs in multi-link and independent arm suspension systems.
- Suitable for both front and rear shock absorber springs.
- Max capacity 146,000N / 14,900 Kg.
- Telescopic tool ranges from 70 to 393 mm.
- On-car operation.
- Provided with two pairs of discs:
- Ø70/130: Mercedes-Benz (W1123, W124, W202, W208, W210).
- Ø90/150: Fiat, GM, Hyundai, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Rover, Saab, Toyota, Volvo and Volkswagen.
- Safety design on tool and discs offer stronger connection.
- Meets standards of CE certification.
- Set not designed to be used with an air, impact or power wrench.
- Stock Ref. No. 9CL-11001
-
Internal coil spring compressor
- Working on vehicles with wishbone suspensions.
- Suitable for wishbone lower hole diameter bigger than 30 mm.
- Small-sized spindle suitable for on-car operation.
- Max capacity 39,900 N / 4,072 Kg.
- Telescopic tool ranges from 95 to 220 mm.
- Can be operated with an air/impact wrench with a 100 Nm torque extension bar.
- Suitable for BMW (3 series 1996 – 2013), Chrysler, Chevrolet, Citroën, Ford, Honda, Hyundai, Kia, Mazda, Mercedes-Benz W202, W204 (1997-2013), Mitsubishi, Renault, Peugeot, Škoda, Suzuki, Toyota, Volvo and Volkswagen.
- Safety design on tool and discs offer stronger connection.
- Meets standards of CE certification.
- Stock Ref. No. 9CL-1100133
-
Turnbuckles for shock absorber caps
- 39 turnbuckles with different sizes for a wide selection of shock absorber caps.
- Sockets and bits are for counter-holding and loosening.
- For clamping the piston rod when doing shock absorber services.
- Precise torque can be applied while fastening the shock absorber piston rods.
- Stock Ref. No. 9CL-11022
