9CL-89102
Hot
7’’ low profile sway bar link pliers with sawteeth
- Holds and easily removes sway bar link.
- Special 3-point gripping design strongly grips and works on rusted nuts, pipes and other objects.
- Thinner body (compared to 9CL-89101) to tackle limited space problems.
- Dimensions
| Packing | Blister + sliding card | |
|---|---|---|
| Packaging | 50 | units/carton |
| N.W | 280 | g/unit |
| 14 | kg/carton | |
| G.W. | 15 | kg/carton |
| Size | N/A | cm/unit |
| Size | N/A | cm/carton |
관련 상품
-
Internal coil spring compressor
- Working on vehicles with wishbone suspensions.
- Suitable for wishbone lower hole diameter bigger than 30 mm.
- Small-sized spindle suitable for on-car operation.
- Max capacity 39,900 N / 4,072 Kg.
- Telescopic tool ranges from 95 to 220 mm.
- Can be operated with an air/impact wrench with a 100 Nm torque extension bar.
- Suitable for BMW (3 series 1996 – 2013), Chrysler, Chevrolet, Citroën, Ford, Honda, Hyundai, Kia, Mazda, Mercedes-Benz W202, W204 (1997-2013), Mitsubishi, Renault, Peugeot, Škoda, Suzuki, Toyota, Volvo and Volkswagen.
- Safety design on tool and discs offer stronger connection.
- Meets standards of CE certification.
- Stock Ref. No. 9CL-1100133
-
Tensioning accesory jaw set for Mercedes-Benz
- An accessory to be used with 9CL-20071 and 9CL-20073.
- Specially designed for Mercedes-Benz W204, X204 and W212 shock absorbers with fewer spring coils.
- Set includes an adapter housing (round jaw and a pair of jaws) and 3 adapters, fitting Mercedes-Benz special shock absorber covers, two 30mm long bolts with washers and two 80mm long bolts with washers.
- Stock Ref. No. 9CL-11007-15
-
MacPherson strut compressor with replaceable jaws
- For compressing MacPherson shock absorber springs.
- Includes 3 pairs of replaceable jaws with different sizes for different applications.
- Suitable for Audi, Acura, Mercedes-Benz, BMW, Ford, Honda, Mitsubishi, Nissan, Porsche, Subaru, Toyota, Volkswagen, Volvo…
- Recommended ON-CAR application for Mercedes 4WD front suspensions.
- Max capacity 10,200 N / 1,050 kgf.
- To be used with a 24 mm spanner or an air wrench to operate this tool.
- Extension bracket provides uses on conical springs.
- Meets standards of CE certification.
- Stock Ref. No. 9CL-1100721
-
MacPherson strut compressor with adjustable jaws & security locks
- Tool for compressing MacPherson shock absorber coil springs.
- Jaw width is adjustable from 100 mm to 250 mm.
- Max capacity 56,800N / 5,800 kgf.
- Set designed to be used with 24 mm spanner.
- Tool equipped with security locks on both jaws for safer shock absorber services.
- Designed for use with an air wrench.
- Meets standards of CE certification.
- Stock Ref. No. 9CL-1100622
-
Special ring for BMW
- An accessory to be used with 9CL-20071 and 9CL-20073.
- Specially designed for BMW coil springs with fewer coils
- OD: Ø176 mm ID: Ø140 mm
- Inner ring cover (yellow) reaches EU RoHS standards, containing no substances of very high concerns (SVHC).
- Stock Ref. No. 9CL-11007-14
-
Turnbuckles for shock absorber caps
- 39 turnbuckles with different sizes for a wide selection of shock absorber caps.
- Sockets and bits are for counter-holding and loosening.
- For clamping the piston rod when doing shock absorber services.
- Precise torque can be applied while fastening the shock absorber piston rods.
- Stock Ref. No. 9CL-11022
-
Special vise for shock absorbers with rubber holders
- Vise specially designed for holding MacPherson struts, or other cylindrical objects such as pistons, tubes and pipes etc.
- Can be fixed on a workbench or wall.
- Application range: Ø26 – 70 mm.
- With rubber holders for better gripping.
- Stock Ref. No. 9CL-1100822
-
Telescopic spring compressor
- Set for compressing shock absorber coil springs in multi-link and independent arm suspension systems.
- Suitable for both front and rear shock absorber springs.
- Max capacity 146,000N / 14,900 Kg.
- Telescopic tool ranges from 70 to 393 mm.
- On-car operation.
- Provided with two pairs of discs:
- Ø70/130: Mercedes-Benz (W1123, W124, W202, W208, W210).
- Ø90/150: Fiat, GM, Hyundai, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Rover, Saab, Toyota, Volvo and Volkswagen.
- Safety design on tool and discs offer stronger connection.
- Meets standards of CE certification.
- Set not designed to be used with an air, impact or power wrench.
- Stock Ref. No. 9CL-11001
-
MacPherson strut compressor with adjustable jaws
- Tool for compressing MacPherson shock absorber coil springs.
- Jaw width is adjustable from 100 mm to 250 mm.
- Max capacity 56,800N / 5,800 kgf.
- Set designed to be used with 21 mm spanner.
- Not designed for use with an air, impact or power wrench.
- Meets standards of CE certification.
- Stock Ref. No. 9CL-11006
