EXT45 Extreme cleaner
- Extreme Cleaner (250ml)
- Holland Engineering
- Made in EU / Bologna Italy
- With EP Lubricants
- Gasoline engine air intake cleaning
- Diesel engine air intake cleaning
- EGR valve cleaning
- VGT turbo cleaning
- DPF/FAP filter cleaning
- Catalytic converter cleaning
- Loose diesel injectors
- NOTE: Highly recommended to use with our Intake/Exhaust cleaning kit, to assure a perfect cleaning in the mentioned systems.
* Not available for USA and Canada
|Size||24 x 5.3 x 5.3||cm/can|
|Size||32.3 x 21.5 x 27||cm/carton|
*GASOLINE AIR INTAKE CLEANING (A) With the engine started, spray EXT45 into the intake manifold using 9 CIRCLE® Intake/ Exhaust Cleaning Kit (supplied separately) with the specific adapter. During the cleaning process, tighten the acceleration pedal repeatedly without exceeding 2,000rpm. In case of extremely bad condition, use two cans of EXT45.
*DIESEL AIR INTAKE CLEANING (B) Same procedure for the gasoline cleaning, the only difference is during the cleaning process, keep the speed around 1,500rpm.
*LOOSE DIESEL INJECTORS (C) Spray EXT45 on the deposits around the injector, giving time to soften them. After that, eliminate the deposits. In case to be unable to remove, repeat the process until all deposits are removed.
*EGR VALVE CLEANING (D) With the engine off and using the suitable adapter from the 9 CIRCLE® Intake/ Exhaust Cleaning Kit, and then spray EXT45 inside the EGR valve. Give time to soften the deposits and repeat the process if necessary.
*VGT TURBO CLEANING (E) If possible, works with the engine on, otherwise use 9 CIRCLE® Intake/Exhaust Cleaning Kit with the specific adapter, giving time to soften them, repeating the process if necessary.
*FAP / DPF FILTER CLEANING (F) Use 9 CIRCLE® Intake/Exhaust Cleaning Kit with the specific adapter and connect to the “Pressure Hose” upstream of the filter. With the engine running at idle, spray half of the EXT45 can into the filter. Switch off the engine and wait minimum 1 hour. Repeat the process, start the engine and spray the rest of the can into the filter, waiting at minimum 2 hours this time. Do a forced regeneration of the filter.
*CATALYTIC CONVERTER CLEANING (G) Use 9 CIRCLE® Intake/Exhaust Cleaning Kit with the specific adapter and connect to the catalytic converter. With the engine running at idle, regulate the Cleaning Kit to give slow and constant flow of the cleaner.