9CL-70130
9CL-71013

Cooling system vacuum purge and refill kit

  • Coolant is easily refilled by creating a vacuum in the radiator.
  • Eliminate airlocks created while refilling coolant.
  • Checks for leaks and refills in seconds.
  • Provided with a universal adapter to fit import and domestic vehicles.
  • Gauge can be hooked underneath the vehicle’s hood.
  • Stock Ref. No. 9CL-71013
  • Dimensions
  • Instructions
  • Downloads
Packing BMC
Packaging 5 sets/carton
N.W 1.8 kg/set
7.8 kg/carton
G.W. 8.8 kg/carton
Size 40 x 31.6 x 9.6 cm/set
Size 40 x 52.5 x 33 cm/carton

CREATE A VACUUM

  1. Drain coolant from the radiator.
  2. Hook the gauge underneath the car’s hood.
  3. Connect an air line to air connector.
  4. Connect the universal radiator adapter onto the radiator filler neck.
  5. Turn on the air switch and air valve, while coolant valve remains off, to create a vacuum in the cooling system.
  6. When the pressure falls into the range between -50 and -60 cmHg (-20 and -25 inHg), turn off the air valve and then the air switch.
  7. Leave the gauge on the radiator for approximately 10 mins to check if there are leaks in the cooling system before refilling new coolant.

REFILL NEW COOLANT

  1. Connect the coolant hose to the coolant hose connector.
  2. Put the other end of the hose into a container filled with pre-mixed new coolant.
  3. Turn on the coolant valve (while the air valve and air switch remain off), coolant will be introduced into the radiator immediately.
  4. The refilling process is completed when the gauge reads zero.
  5. Before putting the gauge back to the case, remove the residual coolant in the gauge.