Product Tag - engine

  • STORM 5W30 (Synthetic)

    • SAE: 5W30
    • API: SM/CF
    • ACEA: A3/B4/C3
    • MB229.1
    • VW500.00/505.00
    • BMW LL
    • GM B 0402098

    High performance synthetic lubricant formulated
    for petrol and diesel engines that require products capable of minimizing ash deposits (sulphate ashes, phosphorus and sulphur).
    Its specific formula meets the specifications of
    BMW and Mercedes-Benz.
    It warrants the utmost efficiency of the particulate filter of fuel oil engines, preventing it from clogging.
    • It lengthens the life of catalysts on petrol engines.
    • Fuel economy properties.
    • Protection against wear.
    • It meets the new requirements of ACEA C3 specification.

     

    9 CIRCLE® STORM includes HTPS (High Temperature High Shear) viscosity stabilizer.

    HTPS viscosity is an oil parameter from the 21st century that shows the thickness of oil film under real conditions of the engine: high temperature of 150ºC and high shear rate.

    HTPS viscosity stabilizer increases the power of the engine at the same time that reduces the fuel consumption, stabilizing oil film in the friction zones protecting the engine, being safe for modern sensitive engines.

    Recommend for use in the following conditions:
    • Traffic jams and short distance driving
    • Loss of power on low and middle rpm
    • Oil burning after small mileage
    • Increase of engine noise

  • STORM 5W40 (Synthetic)

    • SAE: 5W40
    • API: SM/CF
    • ACEA: A3/B3  A3/B4
    • MB229.1
    • VW500.00/505.00
    • BMW LL

    Synthetic lubricant formulated for high-performance engines fitted with GDI & CRDI.
    Its high cleansing and dispersing power improved running cold and extreme viscosimetric stability enable the highest levels of performance and protection through VB540 is the synthetic lubricants for petrol and diesel engines.
    It is able of meeting the higher performance
    requirements of the engine
    • It ensures high stability at high temperatures.
    • Specific Pour point
    • Excellent wear protection for engines with high power performance
    • High friction reduction among mechanical components
    • Greater engine performance

     

    9 CIRCLE® STORM includes HTPS (High Temperature High Shear) viscosity stabilizer.

    HTPS viscosity is an oil parameter from the 21st century that shows the thickness of oil film under real conditions of the engine: high temperature of 150ºC and high shear rate.

    HTPS viscosity stabilizer increases the power of the engine at the same time that reduces the fuel consumption, stabilizing oil film in the friction zones protecting the engine, being safe for modern sensitive engines.

    Recommend for use in the following conditions:
    • Traffic jams and short distance driving
    • Loss of power on low and middle rpm
    • Oil burning after small mileage
    • Increase of engine noise

  • Blind hole bearing puller and slide hammer set (11 pcs)

    • Designed for jobs that require an internal puller.
    • Slide hammer with T-handle for better grip.
    • Stock Ref. No. 9CL-42029
  • Blind hole bearing puller and slide hammer set (16 pcs)

    • Designed for jobs that require an internal puller.
    • Slide hammer with T-handle for better grip.
    • Stock Ref. No. 9CL-4202921
  • Camshaft seal installer

    • To install camshaft and crankshaft seals.
    • Adjustable installer to fit deep camshaft seals.
    • For Lexus, Mazda, Nissan and Toyota.
    • Stud sizes: 1/2”-20 x M10 and 1/2”-20 x M12.
    • Stock Ref. No. 9CL-42202
  • Seal puller set (3 pcs)

    • Special angled tip for easy removal of O-rings and sealants.
    • Universal application.
    • Puller length: 117, 150 and 167 mm.
    • Stock Ref. No. 9CL-42092
  • Universal adjustable pulley holding tool

    • For holding pulleys when doing timing belt services.
    • Tool opening range: 25-100mm.
    • For Audi, BMW, Ford, Honda, Lexus, Mercedes-Benz, Nissan, Subaru, Toyota, Volkswagen and Volvo.
    • Step pins sizes: 7, 10, 14 and 16mm.
    • Stock Ref. No. 9CL-42121
  • Camshaft and crankshaft seal remover and installer kit (27 pcs)

    • For removing and installing camshaft and crankshaft seals.
    • Includes bolt and seal attachments with various sizes.
    • Provided with two seal pullers.
    • Stock Ref. No. 9CL-42093
  • Camshaft and crankshaft seal installer kit

    • Installs camshaft and crankshaft seals.
    • Contains bolt attachments, adapters and seal attachments with various sizes.
    • Stock Ref. No. 9CL-4209321
  • Oil shower kit

    • Cleans the engine oil line using air shower and oil shower (both with pressure) by removing rest chemical, oil sludge and the build-up deposits, giving vehicle a clean slate, keeping new engine oil clean, cleaning up what the filter misses and cleaning engine parts.
    • Helps draining completely the engine oil using the air shower.
    • Allow the new engine oil that will be poured inside the vehicle to don’t get mixed with the old oil and waste, assisting the new oil to accomplish all its functions described in its characteristics and specs.
    • Complete accessory to fit universal vehicles and oil filter / oil filter cartridge type – One set for almost all vehicles.
    • Stock Ref. No. 9CL-074
  • Gasoline cylinder compression tester (8 pcs)

    • Test compression pressure on gasoline engines.
    • Includes 4 spark plug adapters.
    • Angled aluminum test bar for V-shape engines.
    • Gauge reading: 0-300 psi.
    • Stock Ref. No. 9CL-41028
  • Gasoline cylinder compression tester (9 pcs)

    • Test compression pressure on gasoline engines.
    • Includes 5 spark plug adapters.
    • Angled aluminum test bar for V-shape engines.
    • Gauge reading: 0-300 psi.
    • M16 spark plug adapter for Ford F-150 and Triton.
    • Stock Ref. No. 9CL-41028-22