Product Tag - absorber

  • MacPherson strut compressor with adjustable jaws & security locks

    • Tool for compressing MacPherson shock absorber coil springs.
    • Jaw width is adjustable from 100 mm to 250 mm.
    • Max capacity 56,800N / 5,800 kgf.
    • Set designed to be used with 24 mm spanner.
    • Tool equipped with security locks on both jaws for safer shock absorber services.
    • Designed for use with an air wrench.
    • Meets standards of CE certification.
    • Stock Ref. No. 9CL-1100622
  • MacPherson strut compressor with adjustable jaws

    • Tool for compressing MacPherson shock absorber coil springs.
    • Jaw width is adjustable from 100 mm to 250 mm.
    • Max capacity 56,800N / 5,800 kgf.
    • Set designed to be used with 21 mm spanner.
    • Not designed for use with an air, impact or power wrench.
    • Meets standards of CE certification.
    • Stock Ref. No. 9CL-11006
  • MacPherson strut compressor with replaceable jaws and protection covers

    • For compressing MacPherson shock absorber springs.
    • Includes 3 pairs of replaceable jaws with different sizes for different applications.
    • Suitable for Audi, Acura, Mercedes-Benz, BMW, Ford, Honda, Mitsubishi, Nissan, Porsche, Subaru, Toyota, Volkswagen, Volvo…
    • Recommended ON-CAR application for Mercedes 4WD front suspensions.
    • Max capacity 10,200 N / 1,050 kgf.
    • To be used with a 24 mm spanner or an air wrench to operate this tool.
    • Extension bracket provides uses on conical springs.
    • Meets standards of CE certification.
    • Jaw covers to protect the spring coating.
    • Protection covers reach RoHS standards.
    • Stock Ref. No. 9CL-1100742
  • MacPherson strut compressor with replaceable jaws

    • For compressing MacPherson shock absorber springs.
    • Includes 3 pairs of replaceable jaws with different sizes for different applications.
    • Suitable for Audi, Acura, Mercedes-Benz, BMW, Ford, Honda, Mitsubishi, Nissan, Porsche, Subaru, Toyota, Volkswagen, Volvo…
    • Recommended ON-CAR application for Mercedes 4WD front suspensions.
    • Max capacity 10,200 N / 1,050 kgf.
    • To be used with a 24 mm spanner or an air wrench to operate this tool.
    • Extension bracket provides uses on conical springs.
    • Meets standards of CE certification.
    • Stock Ref. No. 9CL-1100721
  • Tensioning accesory jaw set for Mercedes-Benz

    • An accessory to be used with 9CL-20071 and 9CL-20073.
    • Specially designed for Mercedes-Benz W204, X204 and W212 shock absorbers with fewer spring coils.
    • Set includes an adapter housing (round jaw and a pair of jaws) and 3 adapters, fitting Mercedes-Benz special shock absorber covers, two 30mm long bolts with washers and two 80mm long bolts with washers.
    • Stock Ref. No. 9CL-11007-15
  • Special ring for BMW

    • An accessory to be used with 9CL-20071 and 9CL-20073.
    • Specially designed for BMW coil springs with fewer coils
    • OD: Ø176 mm ID: Ø140 mm
    • Inner ring cover (yellow) reaches EU RoHS standards, containing no substances of very high concerns (SVHC).
    • Stock Ref. No. 9CL-11007-14
  • Special vise for shock absorbers with rubber holders

    • Vise specially designed for holding MacPherson struts, or other cylindrical objects such as pistons, tubes and pipes etc.
    • Can be fixed on a workbench or wall.
    • Application range: Ø26 – 70 mm.
    • With rubber holders for better gripping.
    • Stock Ref. No. 9CL-1100822
  • Telescopic spring compressor

    • Set for compressing shock absorber coil springs in multi-link and independent arm suspension systems.
    • Suitable for both front and rear shock absorber springs.
    • Max capacity 146,000N / 14,900 Kg.
    • Telescopic tool ranges from 70 to 393 mm.
    • On-car operation.
    • Provided with two pairs of discs:
      • Ø70/130: Mercedes-Benz (W1123, W124, W202, W208, W210).
      • Ø90/150: Fiat, GM, Hyundai, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Rover, Saab, Toyota, Volvo and Volkswagen.
    • Safety design on tool and discs offer stronger connection.
    • Meets standards of CE certification.
    • Set not designed to be used with an air, impact or power wrench.
    • Stock Ref. No. 9CL-11001
  • Internal coil spring compressor

    • Working on vehicles with wishbone suspensions.
    • Suitable for wishbone lower hole diameter bigger than 30 mm.
    • Small-sized spindle suitable for on-car operation.
    • Max capacity 39,900 N / 4,072 Kg.
    • Telescopic tool ranges from 95 to 220 mm.
    • Can be operated with an air/impact wrench with a 100 Nm torque extension bar.
    • Suitable for BMW (3 series 1996 – 2013), Chrysler, Chevrolet, Citroën, Ford, Honda, Hyundai, Kia, Mazda, Mercedes-Benz W202, W204 (1997-2013), Mitsubishi, Renault, Peugeot, Škoda, Suzuki, Toyota, Volvo and Volkswagen.
    • Safety design on tool and discs offer stronger connection.
    • Meets standards of CE certification.
    • Stock Ref. No. 9CL-1100133
  • Turnbuckles for shock absorber caps

    • 39 turnbuckles with different sizes for a wide selection of shock absorber caps.
    • Sockets and bits are for counter-holding and loosening.
    • For clamping the piston rod when doing shock absorber services.
    • Precise torque can be applied while fastening the shock absorber piston rods.
    • Stock Ref. No. 9CL-11022