Engine system

  • 11 Liters (2.91 Gallons) suction and filling equipment

    • High efficiency: Pneumatic power evacuates and dispenses fluid quickly.
    • Visual effect: Transparent tanks easily compare oil quality and flow.
    • Work with engine oil, ATF, gear oil, coolant and other fluids.
    • Comes with auto release pressure: 0.8 kg/cm²
    • Stock Ref. No. 9CL-159011
  • 5.5 Liters (1.45 Gallons) suction and filling equipment

    • High efficiency: pneumatic power evacuates and dispenses fluid quickly.
    • Visual effect: transparent tank easily compare oil quality and flow.
    • Work with engine oil, ATF, gear oil, coolant and other fluids.
    • Comes with auto release pressure: 0.8 kg/cm²
    • Stock Ref. No. 9CL-15905
  • Back pressure tester kit

    • Kit for testing clogged or broken catalytic converter.
    • Includes an M14-M18 lambda sensor connector.
    • Gauge with a high temperature resistant Teflon wire line.
    • Stock Ref. No. 9CL-41023
  • Engine flush machine

    • 3-step perfect flush
      1. Active flush work with filter cleans engine oil line sludge and contaminants.
      2. Two 5 liters transparent tanks provide oil shower and air shower to flush out remained oil and flush chemical.
      3. Intake & exhaust system clean during engine oil line flushing helps increasing engine performance.
    • Stock Ref. No. 9CL-1301
  • Intake/Exhaust cleaning kit

    • Special kit for cleaning:
      • Gasoline engine air intake
      • Diesel engine air intake
      • EGR valve
      • VGT turbo
      • DPF/FAP filter
      • Catalytic converter
    • Use only with oil base chemicals/cleaners.
    • Cylinder made of aluminum with capacity of 500 ml.

    Note: highly recommended to use with our EXT45, to assure a perfect cleaning in the mentioned systems.

    Stock Ref. No. 9CL-40800

  • STORM 5W30 (Synthetic)

    • SAE: 5W30
    • API: SM/CF
    • ACEA: A3/B4/C3
    • MB229.1
    • VW500.00/505.00
    • BMW LL
    • GM B 0402098

    High performance synthetic lubricant formulated
    for petrol and diesel engines that require products capable of minimizing ash deposits (sulphate ashes, phosphorus and sulphur).
    Its specific formula meets the specifications of
    BMW and Mercedes-Benz.
    It warrants the utmost efficiency of the particulate filter of fuel oil engines, preventing it from clogging.
    • It lengthens the life of catalysts on petrol engines.
    • Fuel economy properties.
    • Protection against wear.
    • It meets the new requirements of ACEA C3 specification.

     

    9 CIRCLE® STORM includes HTPS (High Temperature High Shear) viscosity stabilizer.

    HTPS viscosity is an oil parameter from the 21st century that shows the thickness of oil film under real conditions of the engine: high temperature of 150ºC and high shear rate.

    HTPS viscosity stabilizer increases the power of the engine at the same time that reduces the fuel consumption, stabilizing oil film in the friction zones protecting the engine, being safe for modern sensitive engines.

    Recommend for use in the following conditions:
    • Traffic jams and short distance driving
    • Loss of power on low and middle rpm
    • Oil burning after small mileage
    • Increase of engine noise

  • STORM 5W40 (Synthetic)

    • SAE: 5W40
    • API: SM/CF
    • ACEA: A3/B3  A3/B4
    • MB229.1
    • VW500.00/505.00
    • BMW LL

    Synthetic lubricant formulated for high-performance engines fitted with GDI & CRDI.
    Its high cleansing and dispersing power improved running cold and extreme viscosimetric stability enable the highest levels of performance and protection through VB540 is the synthetic lubricants for petrol and diesel engines.
    It is able of meeting the higher performance
    requirements of the engine
    • It ensures high stability at high temperatures.
    • Specific Pour point
    • Excellent wear protection for engines with high power performance
    • High friction reduction among mechanical components
    • Greater engine performance

     

    9 CIRCLE® STORM includes HTPS (High Temperature High Shear) viscosity stabilizer.

    HTPS viscosity is an oil parameter from the 21st century that shows the thickness of oil film under real conditions of the engine: high temperature of 150ºC and high shear rate.

    HTPS viscosity stabilizer increases the power of the engine at the same time that reduces the fuel consumption, stabilizing oil film in the friction zones protecting the engine, being safe for modern sensitive engines.

    Recommend for use in the following conditions:
    • Traffic jams and short distance driving
    • Loss of power on low and middle rpm
    • Oil burning after small mileage
    • Increase of engine noise

  • Oil funnel set

    • For refilling oil and fluids.
    • Long bar is designed for transmission dipstick located in difficult to reach places, e.g. Acura and Honda.
    • Stock Ref. No. 9CL-612704281
  • Blind hole bearing puller and slide hammer set (11 pcs)

    • Designed for jobs that require an internal puller.
    • Slide hammer with T-handle for better grip.
    • Stock Ref. No. 9CL-42029
  • Blind hole bearing puller and slide hammer set (16 pcs)

    • Designed for jobs that require an internal puller.
    • Slide hammer with T-handle for better grip.
    • Stock Ref. No. 9CL-4202921
  • Camshaft seal installer

    • To install camshaft and crankshaft seals.
    • Adjustable installer to fit deep camshaft seals.
    • For Lexus, Mazda, Nissan and Toyota.
    • Stud sizes: 1/2”-20 x M10 and 1/2”-20 x M12.
    • Stock Ref. No. 9CL-42202
  • Seal puller set (3 pcs)

    • Special angled tip for easy removal of O-rings and sealants.
    • Universal application.
    • Puller length: 117, 150 and 167 mm.
    • Stock Ref. No. 9CL-42092