Featured products
-
9CL-10910Hot
Read MoreQuick ViewInner tie rod tool (35 – 45 mm)
- To remove fast and easily worn axial joint on tie rod ends and install new tie rods with a 27 mm spanner or 1/2”DR.
- Special inner head design auto-grips axial joint firmly by turning clockwise and anti-clockwise.
- Knurled handle for stronger grip.
- Application: range Ø35 – Ø45 mm, mainly for European passenger cars.
- Stock Ref. No. 9CL-11091
-
9CL-65801Hot
Read MoreQuick View12.5 Liter pneumatic and manual ATF refilling set
- For fast refilling new ATF on transmission without dipstick.
- Special design combines pneumatic and manual functions together.
- Large tank 12.5 liters (3.3 gallon) is suitable for refilling fluids with large volume.
- Includes 10 adapters for most popular vehicles (Audi, Ford, Mercedes, Toyota, Volkswagen and Volvo).
- Stock Ref. No. 9CL-625803373-9
-
9CL-95007Hot
Read MoreQuick ViewTire deflator for TPMS valves
- Deflates tire pressure gradually without damaging TPMS (Tire Pressure Monitoring System) sensors.
- Universal thread size: 5/16” x 32 UNEF.
- Color coated and position marking help mount tires on correct locations.
- No need to reset the TPMS.
- Stock Ref. No. 9CL-95007
-
9CL-86601Hot
Read MoreQuick ViewLight cover remover set
- For easy and crack-free removal front and tail light covers.
- Universal application on light covers with clips, not for screwed ones.
- Slip-resistant handle provides secure grips.
- Plastic probes avoid scrapes on light covers.
- Angular type for clips located deep inside the light covers.
- Stock Ref. No. 9CL-86601
-
9CL-40281Hot
Read MoreQuick ViewGasoline cylinder compression tester (9 pcs)
- Test compression pressure on gasoline engines.
- Includes 5 spark plug adapters.
- Angled aluminum test bar for V-shape engines.
- Gauge reading: 0-300 psi.
- M16 spark plug adapter for Ford F-150 and Triton.
- Stock Ref. No. 9CL-41028-22
-
9CL-58030Hot
Read MoreQuick ViewDiesel compression tester (37 pcs)
- Includes high quality hydraulic pressure gauge.
- Gauge reading: 70 bar / 1000 psi.
- Provided with 22 glow plug adapters, 4 injector adapters and 1 set clamp-on universal injector adapter, covering a wide vehicle application.
- Stock Ref. No. 9CL-51803
-
9CL-20062Hot
Read MoreQuick ViewMacPherson strut compressor with adjustable jaws & security locks
- Tool for compressing MacPherson shock absorber coil springs.
- Jaw width is adjustable from 100 mm to 250 mm.
- Max capacity 56,800N / 5,800 kgf.
- Set designed to be used with 24 mm spanner.
- Tool equipped with security locks on both jaws for safer shock absorber services.
- Designed for use with an air wrench.
- Meets standards of CE certification.
- Stock Ref. No. 9CL-1100622
-
9CL-20073Hot
Read MoreQuick ViewMacPherson strut compressor with replaceable jaws and protection covers
- For compressing MacPherson shock absorber springs.
- Includes 3 pairs of replaceable jaws with different sizes for different applications.
- Suitable for Audi, Acura, Mercedes-Benz, BMW, Ford, Honda, Mitsubishi, Nissan, Porsche, Subaru, Toyota, Volkswagen, Volvo…
- Recommended ON-CAR application for Mercedes 4WD front suspensions.
- Max capacity 10,200 N / 1,050 kgf.
- To be used with a 24 mm spanner or an air wrench to operate this tool.
- Extension bracket provides uses on conical springs.
- Meets standards of CE certification.
- Jaw covers to protect the spring coating.
- Protection covers reach RoHS standards.
- Stock Ref. No. 9CL-1100742
-
9CL-89101Hot
Read MoreQuick View9’’ long sway bar link pliers with sawteeth
- Holds and easily removes sway bar link.
- Strongly grips and works on rusted nuts, pipes and other objects.
-
9CL-41200Hot
Read MoreQuick ViewExhaust hanger removal pliers
- The adjustable head provides wide-angle applications.
- Removes exhaust components from rubber-style hangers.
- Strong exhaust hanger pliers (14.5” length) (ca. 367 mm), and adjustable forcing the pin to provide better result.
- Stock Ref. No. 9CL-45120
-
9CL-41500Hot
Read MoreQuick ViewMultipurpose connector set (92 pcs)
- For testing automotive sensors, electromagnetic valves, air bags, as well as other electric systems.
- Suitable for all major vehicle types.
- In use with digital multimeters.
- Stock Ref. No. 9CL-47150
-
9CL-11040Hot
Read MoreQuick ViewBushing and bearing remover and installer set (57 pcs)
- Works on most passenger cars.
- On-car application.
- Easy work to remove and install bearing bushes, hydraulic bearings, silent bearings and rubber bearings.
- Spindle sizes:
- ØM x Pitch (mm)
10 x 1.5 12 x 1.75
14 x 2.0 16 x 2.0
- ØM x Pitch (mm)
- Sleeve sizes:
- Øext x Øint (mm)
26 x 18 48 x 40
28 x 20 50 x 42
30 x 22 52 x 44
32 x 24 54 x 46
34 x 26 56 x 48
36 x 28 58 x 50
38 x 30 60 x 52
40 x 32 62 x 54
42 x 34 64 x 56
44 x 36 66 x 58
46 x 38 68 x 60
- Øext x Øint (mm)
- Stock Ref. No. 9CL-11104